Murdoch Rd, C-Bus Home Automation
This was a project where the plans had shown multiple dimmers
per room for full control of the lighting throughout.
This would have meant multiple wall switches/dimmers which was
defiantly not what they were after, upon looking over this we put
forward an idea to move into a lighting control system where they
can have one wall plate per room again, and also included scene
control of the lighting where one switch can set a scene for lights
ramped to set levels.
A Clipsal C-Bus system was agreed upon as a system that could
easily control the lighting, with stainless steel screw less cover
plates (only 2 mm thick) and with stylish blue indicator neon's was
a great look that also enhanced the overall environment.
The finished product reflects our commitment to being able to
access and design systems from the first initial meeting where
firstly we listen… then put forward solutions and implement them
for the best possible outcome.
"We set about rebuilding our 19 century Villa and wanted a mix
of both old and modern style. Our plans called for a number of
halogen lights inside and outside the house. The kitchen and
outdoor entertaining area alone has approximately 60 halogens all
of which were to be dimmed.
We understood that there would be many light switches and
dimmers because; at the time we did not know about smart wiring.
Scott from Quantum explained to us the benefits of a smart wired
house and suggested the Clipsal C-Bus wiring system. The result was
significant reduction in switches and dimmers and far more
flexibility to our lighting plan. All in all a stylish solution to
what was an ugly problem.
We have used Scott and the team from Quantum on a number of
other projects because we value their contribution to the building
process and the quality of their work."
Regards,
Michael Moore
